5.
Your remote log server will appear in the Remote Log Server panel.
6.
This action will configure all logs to be sent to the remote server together.
Changing or deleting a remote log server:
1.
Navigate to MANAGEMENT > OTHER: Log Configuration.
2.
In the Remote Log Server panel locate the remote server you wish to change or delete.
3.
Choose the MINUS button to delete the remote log server. Confirm by clicking OK in the
message window.
—OR—
3.
In the Remote Log Server panel, click the GEAR button to change the remote log server.
Type in a new IP address or host domain server (e.g., MyDomain.com).
4.6.2.6 Clearing All Logs
Note: Authentication logs and NTP logs cannot be cleared.
All local logs in the home/spectracom directory will be logged. Other logs e.g., located
on Syslog Servers, must be maintained by the user.
To clear all locally stored log files:
1.
Navigate to MANAGEMENT > OTHER: Log Configuration.
2.
In the Actions panel, click Clear All Logs:
220
CHAPTER 4 • VersaSync User Manual Rev. 6.0
4.6 Quality Management
To Next Page
Loading...
