Spectracom VersaSync - 1.8 The VersaSync Web UI

Protection: IP 65
Vibration:
7.7 g rms, 20 to 1000 Hz (in accordance with MIL-STD 810G, Method 214.6 Cat-
egory 24: Minimum Integrity and Helicopter Minimum Integrity, see graphs
514.7E-1 and 514.7E-2)
Shock: 20 g, 11 ms (pulse sawtooth) in accordance with MIL-STD 810G, Method 516.7
Procedure1
1.8 The VersaSync Web UI
VersaSync has an integrated web user interface (referred to as "WebUI" throughout this doc-
umentation) that can be accessed from a network-connected computer, using a standard web
browser. The WebUI is used to configure and monitor the unit.
Note: An integrated Command-Line Interpreter interface (CLI) allows the use of a
subset of commands that are integrated into the Web UI.
The minimum browser requirements for the Web UI are: Internet Explorer
®
9 or higher,
Firefox
®
, or Chrome
®
.
1.8.1 The Web UI HOME Screen
Note: Screens displayed in this manual are for illustrative purposes. Actual
screens may vary depending upon the configuration of your product.
The HOME screen of the VersaSync web user interface ("Web UI") provides comprehensive
status information at a glance, including:
vital system information
current status of the references
key performance/accuracy data
major log events.
The HOMEscreen can be accessed from anywhere in the Web UI, using the HOMEbutton in
the Primary Navigation Bar:
16
CHAPTER 1 • VersaSync User Manual Rev. 6.0
1.8 The VersaSync Web UI