1.7 VersaSync Specifications
1.7.1 Supply Power
Operating Power and Standby Power: 10 to 32 V
DC
Power draw:
Operating: 10 W typical
Standby: 0.4W
1.7.2 GNSS Receiver
VersaSync has an integrated state-of-the-art GNSS receiver, suitable for concurrent dual-con-
stellation reception.
Compatible signals:
GPS L1 C/A (center frequency 1575.42 MHz)
GLONASS L10F (center frequency 1602.0 MHz)
Galileo E1 B/C (center frequency 1575.42 MHz)
QZSS L1-SAIF (center frequency 1575.42 MHz)
BeiDou B1 (center frequency 1561.098 MHz)
Satellites tracked: Up to 72 simultaneously
Update rate: up to 2Hz (concurrent)
Acquisition time: Typically <27seconds from cold start
Antenna requirements: Active antenna module, +5V, powered by VersaSync, 16dB gain min-
imum
Antenna connector: SMA
14
CHAPTER 1 • VersaSync User Manual Rev. 6.0
1.7 VersaSync Specifications