Spectracom VersaSync - 2.7.8.10 NTP Access Restrictions

2.7.8.10 NTP Access Restrictions
Next to encrypted authentication by means of Symmetric Keys, NTP supports a list-based means
of access restriction, the use of which is also recommended to prevent fraudulent or inadvertent
manipulation of a time server.
To configure NTP Access Restrictions:
1.
Navigate to MANAGEMENT > NETWORK: NTP Setup.
2.
In the Actions panel, click Access Restrictions:
3.
The NTP Access Restrictions Status window will display:
To ADD or EDIT an access restriction, click the PLUS icon or the Change button,
respectively, and proceed to Step4. below.
To DELETE an access restriction, click the corresponding Delete button, and con-
firm by clicking OK.
2.7 Configuring Network Settings
CHAPTER 2 • VersaSync User Manual Rev. 6.0
101