Spectracom VersaSync - Configuring an ASCII Input

2.6.4.3 Configuring an ASCII Input
To configure an ASCII Input (ATC = ASCII Time Code):
1.
Navigate to INTERFACES > REFERENCES: ASCII Input 0 (or: INTERFACES >
OPTIONCARDS: ASCII Input 0). The status window will open, providing information on
the current Reference ID, input Validity, ASCII Format, and if a pending Leap Second
will be added to the UTC timescale at the end of the month. (See also "Local Clock(s),
DST" on page126.)
2.
Click Edit to open the configuration window:
The following settings are editable:
Format Group: Determines the time code message format category (see also "Time
Code Data Formats" on page246.) Choices are:
Auto
Spectracom
NMEA
ICD-153
EndRun
Format: Once a Format Group has been selected, one or more Format fields may
appear, allowing you to select one or more time code Formats. For detailed spe-
cifications and limitations on the supported time code formats, see "Time Code
Data Formats" on page246.
2.6 Configuring Inputs/Outputs
CHAPTER 2 • VersaSync User Manual Rev. 6.0
45