Spectracom VersaSync - Determining Your GNSS Receiver Model

graph, and the status information for the selected time.
3.3.3.2 Determining Your GNSS Receiver Model
Note: All VersaSync models are currently shipped with a u-blox M8T Receiver.
To determine which GNSS receiver model is installed in a VersaSync unit:
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup.
2.
In the System Configuration panel, locate the line item GNSS Receiver:
GNSS Receiver Models
Spectracom strives to equip VersaSync with current technology. Depending on the production
date of your VersaSync unit, one of the following GNSS receiver models will be installed in
your unit (if any):
u-blox
®
M8T
152
CHAPTER 3 • VersaSync User Manual Rev. 6.0
3.3 Managing References