Spectracom VersaSync - Page 7

2.6.4.2 Configuring a 1PPS Output
44
2.6.4.3 Configuring an ASCII Input
45
2.6.4.4 Configuring an ASCII Output
47
2.6.4.5 Configuring a HaveQuick Input
50
2.6.4.6 Configuring a HaveQuick Output
51
2.6.5 Signature Control
52
2.7 Configuring Network Settings
54
2.7.1 General Network Settings
55
2.7.2 Network Ports
55
2.7.3 Network Services
57
2.7.4 Access Rules
58
2.7.5 SSH
59
2.7.6 SNMP
66
2.7.6.1 SNMP V1/V2c
70
2.7.6.2 SNMP V3
71
2.7.6.3 SNMP Traps
73
2.7.7 System Time Message
75
2.7.7.1 System Time Message Format
76
2.7.8 Configuring NTP
77
2.7.8.1 Checklist NTP Configuration
77
2.7.8.2 The NTP Setup Screen
78
2.7.8.3 Dis-/Enabling NTP
80
2.7.8.4 Viewing NTP Clients
81
2.7.8.5 Restoring the Default NTP Configuration
82
2.7.8.6 NTP Output Timescale
82
2.7.8.7 NTP Reference Configuration
84
2.7.8.8 NTP Servers and Peers
86
2.7.8.9 NTP Authentication
93
2.7.8.10 NTP Access Restrictions
101
2.7.8.11 NTP Expert Mode
102
2.7.8.12 Spectracom Technical Support for NTP
105
2.7.9 Configuring PTP
106
2.7.9.1 The PTP Screen
106
2.7.9.2 Enabling/Disabling PTP
109
2.7.9.3 Configuration — General Steps
110
2.7.10 GPSD Setup
110
VersaSync User Manual • TABLE OF CONTENTS
V