Maintenance 125
2005995 Rev O – 210712
5. Pour half a quart of internal flush fluid into the Ink Reservoir, slosh it around in the Ink
Reservoir, and pour it out into the waste ink receptacle.
6. Repeat two more times.
7. Screw the Shipping Cap onto the Ink Reservoir.
ATTENTION: To avoid damage that can affect functionality, Ink Reservoirs should
spend a minimum amount of time in storage or shipping.
Capping Off the Ink Line and Pouring Flush into the Ink Reservoir
Cap
Ink Reservoir
Ink Line
Internal Flush
Fluid
Reservoir
Vent Tube
Capping the Ink Reservoir
Ink Reservoir
Shipping
Cap
To Next Page
Loading...
