Steris Reliance EPS Endoscope Processing System User Manual

6-6
920011-649 Operator Manual Routine Maintenance
IMPORTANT: If door is not opened and no touch pad or
pushbutton is pressed once D-SHORT cycle is completed (during
a weekend for example), a second D-SHORT cycle automatically
starts after 36 hours so the processor is ready to use on Monday.
AUTOMATIC D-SHORT feature is set in Miscellaneous menu
(S
ECTION 5.2.3, SETTING MISCELLANEOUS VALUES). AUTOMATIC
D-SHORT screen allows operator to activate or deactivate second
D-SHORT starting after the 36 hours of inactivity.
============================
HH:MM:SS MM-DD-YY
============================
CYCLE - D-SHORT
============================
CYCLE START HH:MM:SS XM
CYCLE DATE MM-DD-YY
CYCLE NUMBER 00000001
UNIT NUMBER 3600000000
============================
PHASE TIME
============================
WASH 1 HH:MM:SS XM
WATER
TYPE HOT
TEMPERATU
RE XX.X
RECIRC. TIME MM:SS
AIR PURGE
TEMPERATURE XXX.X
RECIRC. TIME MM:SS
COMPLETED HH:MM:SS XM
TOTAL CYCLE HH:MM:SS
MAXIMUM
FILLING TIME MM:SS
STOP PRESSED HH:MM:SS XM
SAFTEY DOOR LOCK
DISENGAGED HH:MM:SS XM
============================
= READY TO UNLOAD =
============================
DOOR OPEN HH:MM:SS XM
============================
Figure 6-1. D-SHORT Sample Printout

Steris Reliance EPS Endoscope Processing System Specifications

General

Brand	Steris
Model	Reliance EPS Endoscope Processing System
Category	Laboratory Equipment
Language	English