Stratasys F120 - 3 System Components

Basic Setup Welcome Kit Contents
Page 9
© Copyright 2020 Stratasys. All rights reserved.
• Verify that minimum space requirements have been met.
Table 3: Printer Clearances
Side Clearance
Right Side Clearance Minimum 20 inches (50.8 cm)
Left Side Clearance Minimum 4 inches (10.16 cm)
Rear Clearance Minimum 6 inches (15.24 cm)
Front Clearance Minimum 20 inches (50.80 cm)
Overhead Clearance Minimum 20 inches (50.80 cm)