Stratasys Objet1000 Plus - Page 113

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-78
ThefollowingoperationsareavailableontheJob Managerribbon:
Group Icon Purpose
3D
Printer
Client:Setstheserverconnection.See"SettingtheRemotePrinterCon-
nection(ClientMode)"onthepreviouspage.
Server:Setstheprinterconnection.See"SettingthePrinterConnection"
onpage1-1.
 Configuresoptionsforprinteralerts.See"ConfiguringUserAlerts"on
page5-80.
Queue Server:MovesajobtotheheadoftheJobsQueue.
Client:Disabled.
See"JobsQueue"onpage5-76.
 Server:MovesajobtoahigherpositionintheJobs Queue.
Client:Disabled.
See"JobsQueue"onpage5-76
 Server:MovesajobtothebottomoftheJobs Queue.
Client:Disabled.
See"JobsQueue"onpage5-76.
 Server:MovesajobtoalowerpositionintheJobs Queue.
Client:Disabled.
See"JobsQueue"onpage5-76.
Job Server:
• ForajobintheJobs Queue—Printsitagain(fromthebeginning).
• ForajobintheHistorylist—MovesittotheJobs Queue forprinting.
Client:Disabled.
See"RestartingJobs"onpage5-83.
 Server:Stopsajobinprogress.
Client:Disabled
 Server:Continuesprintingthecurrentjobfromthepointwhereprinting
stopped.
Client:Disabled.
See"ResumingJobs"onpage5-83.
 Removestheselectedjobfromthequeue.
 RefreshestheimageoftheselectedjobintheTray Previewdisplay.
 OpenstheTray Settingsscreenanddisplaysthetray.Fordeletedjobs,
thisenablesyoutomakechangesbeforeprinting.