Stratasys Objet1000 Plus - Page 162

Objet1000 Plus User Guide 6 Operating and Maintaining the Objet1000 Plus 3DPrinter
DOC-06810 Rev.B 6-42
9. Inthewizardscreen,selecttheconfirmationcheckboxesandclickNext.
Figure6-54Preparationcheck
AfterwarmingtheprintblockandturningontheUVlamps,theprinter
printsaframeonthebuildtrayforpositioningthescale.
Figure6-55Scalepositioningframeonthebuildtray