Stratasys Objet1000 Plus - Page 187

Objet1000 Plus User Guide 6 Operating and Maintaining the Objet1000 Plus 3DPrinter
DOC-06810 Rev.B 6-67
Theaxesmovetothe“home”position.
4. SelecttheUVlamp(s)tobereplacedandclickNext.
Figure6-104UVlampselectionscreen
5. DisconnecttheUV-lamppowerconnectorandtheUVheatfuse
connector.
Figure6-105DisconnectingtheUVlamp
Note:Donotdisconnectthepowerconnectiontothecoolingfans.