Stratasys Objet1000 Plus - Page 73

Objet1000 Plus User Guide 5 Using Objet Studio
DOC-06810 Rev.B 5-38
2. Clickonpartofanobjectonthebuildtray.
Theselectedplaneisdisplayed.
Figure5-45Aligningbyplane
3. OntheAlignmenttoolbar,clickanappropriateicontochangethe
alignment.
or—
FromtheToolsmenu,selectPlaneAlignment,andselectanalignment
option.
Figure5-46Tools menu,Plane Alignment options