Stryker OSC400 - Connections at the back:

105
S
7. CAN -
8. CAN +
9. Supply GND
Plug-in connection Control for lights 1 + 2
Pin No.
1. Not Connected
2. RS-232, RXD
3. RS-232, TXD
4. Not Connected
5. Supply GND
6. Not Connected
7. Not Connected
8. Not Connected
9. Not Connected
Plug-in BNC connector video
Pin No.
1. Video signal 1VPP at 75 ohm
2. Video GND
Plug-in connection S video
Pin No.
1. Luminance signal
2. Chrominance
3. Luminance GND
4. Chrominance GND
16.5.5 Connections at the back:
• Mains power is connected by a standard IEC connector.
• Safety Power is connected via a 24VDC power connector.