Stryker OSC400 - 3 Tool List; Required Tools; Optional Tools

13
S
3. Tool List
3.1 Required Tools
• Genie li or equipment li, SLC-12 or equivalent
• Torpedo level
• Metric allen set (Shortened 3mm)
• Small and large phillips head
• Small and Large at head screwdriver
• 24mm (15/16 inch) wrench
• Snap ring plier (adjustable to 15mm)
• Torque Wrench (in. lbs.)
• Torque Wrench (. lbs.)
3.2 Optional Tools
• Porta band saw
• Large hand le
• 1/2 inch Drill/Driver
• Tape measure
• Drill bit set
• Hand tool pouch
• Adjustable wrench
• Roofer’s square