93
S
15. Cleaning and Completion
On a ladder, start cleaning at the top of the suspension addressing the ceiling cover and the down tube.
1. Clean the face glass.
2. Provide the primary hospital contact with extra bulbs (halogen only) and sterilizable handles.
3. (In-Service Biomedical and/or maintenance on the lighting system) Focus primarily on brake
adjustments, bulb change, and replacing the electrical board in the light head.
Review the service plan with the hospital contact.
4. Contact the shipping and receiving representative and notify them that the crates are ready for
waste removal.
5. Perform the appropriate QIP for the installation and return to Stryker Communications.
6. Fill out a DHR and mail it to the Designate at Stryker.
To Next Page
Loading...
Need help?
General
