Summa S2 SERIES - 6.2.6 Performance

S CLASS™ 2 cutter User’s Manual
Specifications 6-6
6.2.6 Performance
Cutting specifications on 0.05 mm (0.002") wax-backed vinyl; total media thickness not
greater than 0.25 mm (0.010").
Axial speed 50 to 1000 mm/s 2 to 40 ips
Default speed 800 mm/s 32 ips
Acceleration Up to 5.5 G
Addressable resolution 0.025 mm, 0.1 mm 0.001", 0.005"
Default resolution 0.025 mm 0.001"
Mechanical resolution 6.3 µm 0.25 mil
Accuracy
0.2% of move or 0.25 mm,
whichever is greater (*)
0.2% of move or 0.010",
whichever is greater (*)
Knife pressure for drag head 0 to 400 gr.
Pen pressure for drag head 0 to 400 gr.
Pouncing pressure for drag head 0 to 250 gr.
Knife pressure in tangential head 0 to 600 gr.
Pen pressure in tangential head 0 to 600 gr.
Pouncing pressure in tangential head 0 to 250 gr.
*
Excludes differences due to media expansion, stretching, etc.
FIG 6-6
6-6 S CLASS 2 PERFORMANCES