Summa S2 SERIES - Printing the Graphic; Margins Printing on a Roll

S CLASS™ 2 cutter User’s Manual
OPOS 3-2
3.2.1 Printing the graphic
Print the graphic and its marks with a printer. When printing on a roll, make sure there is a 2
cm (0.8 in) margin at the sides and the front. For shorter jobs the edge margins might be
smaller, but should be at least 1 cm (0.4 in).
FIG 3-1
3-1 MARGINS PRINTING ON A ROLL
When printing on a sheet, then there should be at least 40 mm of media after the last OPOS
mark (this is also the minimum media that should be left at the end of a roll).
FIG MARGINS PRINTING ON A SHEET