Summa S2 SERIES - 4.3 Configuration Menu

S CLASS™ 2 cutter User’s Manual
Detailed Operation 4-4
Configuration Menu
FIG 4-2
4-2 CONFIGURATION MENU
(1) Depends on the tool setting.
(2) Not visible if the tool is not a drag knife.
Long vectors
Automatice
Sorting vectors
Off
Panel replot
0
Panel size
50 cm
Panelling
Off
OptiCut
Off
Overcut
0.1 mm
Advanced cutting
FlexCut velocity
200 mm/s
FlexCut mode
Off
Flex pressure cut
length
1.000 mm
Flex pressure
85 gr
Full pressure cut
length
10.000 mm
Full pressure
200 gr
FlexCut
Calibrate Knife
Knife pressure
90 gr
Velocity
800 mm/s
Tool
Tangential knife
More
More
Settings
Knife offset
0.45 mm
TurboCut
On
G-Performance
High speed