Summa S2 SERIES - Operating Environment

S CLASS™ 2 cutter User’s Manual
Setup 1-11
1.3.2 Operating environment
Environmental conditions can significantly affect the machine’s performance.
The environmental conditions of the machine (without media) are as follows:
Operating Temperature
15 to 35° C
59 to 95° F
Storage temperature
-30 to 70° C
-22 to 158° F
Relative humidity
35 - 75 %, non-condensing
35 - 75 %, non-condensing
It is possible that the environmental conditions of the used media are stricter than those of
the machine itself. Please refer to the documentation about the used media.
Moreover, make sure that the media has had enough time to acclimatize.
NOTE: Keep the cutter away from direct sunlight or a strong indoor light source.
The optical sensors in the machine may be affected, thus causing unexpected
behavior of the cutter.