S CLASS™ 2 cutter User’s Manual
Setup 1-9
Safety, Ideal Operating Environment, Connecting to the Mains
1.3.1 Safety
WARNING: This equipment is not suitable for use in locations where children are
likely to be present.
1.3.1.1 General
The purpose of the user’s manual is not only to explain the operating procedures of this
machine, but it also provides the owner, users and operators with precaution procedures for
safe and proper machine operation for its intended purpose.
All information in this manual must be read and understood before any attempt is made to
operate the machine.
The manufacturer has no direct control over the machine operation and application. Proper
safety practice is the sole responsibility of the owner, user and operator.
All instructions and safety warnings in this manual are based upon the use of this machine
under proper operating conditions without alterations from the original design.
Any use of the cutter that is beyond the capabilities of the combination knife/material is
considered as improper use and may result in injury and serious damage to the machine and
will lead to loss of warranty.
1.3.1.2 Symbols used in the manual
Warning with dark (red) symbol: Refers to immediate threat that can
cause serious injuries and effects on health and safety.
Warning with light (yellow) symbol: Refers to a dangerous situation
that can cause injuries and serious damage to the machine.
Attention with dark (red) symbol: Refers to useful information to
prevent damage to the equipment and prolong the service live of
the machine.
Attention with light (yellow) symbol: Refers to useful tips to enhance
the user-friendliness and make the work significantly easier.
Note: Can be considered as a general tip; something that is useful
to know.
To Next Page
Loading...
