Summa S2 SERIES - Page 91

S CLASS™ 2 cutter User’s Manual
OPOS 3-15
The cutter will make a circular movement while it measures the reflection of the mark colour.
Then it will show a value that is characteristic of this media colour – mark colour combination.
Store this value for future reference.
NOTE: An error message may appear if the sensor is not able to differentiate
between black and white. Make sure that the test has been performed correctly.
NOTE:
If a combination of media color – mark color has already been calibrated
and recorded, this can be used to enter the value directly, without having to
re-measure it.
Set