Suzuki RM-Z250 - Cylinder Removal

CYLINDER HEAD, CYLINDER AND PISTON 6-5
• Remove the cylinder head base nuts

3.
• Loosen the cylinder base bolt

4.
• Remove the cylinder head bolts and washers.
NOTE:
When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
• Remove the cylinder head

5.
NOTE:
If the cylinder head does not come off easily, lightly tap it using a
plastic hammer.
• Remove the cylinder head gasket

6, dowel pins and cam
chain No.1 guide

7.
CYLINDER REMOVAL
• Remove the cylinder head. (!above)
• Remove the cylinder

1 by removing the cylinder base bolt.
NOTE:
If the cylinder does not come off easily, lightly tap it using a plas-
tic hammer.
CAUTION
Do not drop the cam chain and dowel pins into the
crankcase.
CAUTION
Do not drop the cam chain into the crankcase.