Suzuki RM-Z250 - Stator; Removal; Installation

14-14 ELECTRICAL SYSTEM
• Install the magneto cover

3.
NOTE:
Fit the bracket to the bolt

C.
( Magneto cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Install the gearshift lever. ("9-7)
• Pour engine oil. ("2-12)
STATOR
REMOVAL
• Remove the magneto cover. ("14-12)
• Remove the stator

1.
• Remove the clamp

2 and pick-up coil

3.
• Remove the grommet

4.
INSTALLATION
• Fit the stator, pick-up coil, clamp and grommet. ("19-25)
• Apply THREAD LOCK to the stator coil mounting bolts and
tighten them to the specified torque.
) 99000-32050: THREAD LOCK “1342”
( Stator coil mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Tighten the pick-up coil mounting bolts to the specified torque.
NOTE:
First tighten the bolt

A as shown.
( Pick-up coil mounting bolt:
4.5 N·m (0.45 kgf-m, 3.25 lb-ft)
• Install the magneto cover. ("14-14)