Suzuki RM-Z250 - Removal

17-4 FRONT FORK AND STEERING
REMOVAL
• Place the motorcycle on a block to lift front wheel off the
ground.
• Remove the front wheel. (!15-3)
• Remove the front number plate

1.
• Remove the protector

2.
• Remove the handlebars.
NOTE:
Mark the paint mark

A to the matching surface of handlebar
holder and handlebars before removing.
• Remove the fork protector

3 by removing the mounting bolts.
• Remove the brake caliper

4. (!16-7)
• Loosen the front fork upper clamp bolts

5.
• Loosen the front fork cap bolts 1 – 2 turns to facilitate later
disassembly.
" 09941-53630: Front fork top cap wrench
• Hold the fork body and loosen the fork lower clamp bolts

6.
• Remove the front fork.