Suzuki RM-Z250 - Cam Chain, Cam Chain Tensioner and Cam Chain Guide Installation

6-24 CYLINDER HEAD, CYLINDER AND PISTON
CAM CHAIN, CAM CHAIN TENSIONER AND
CAM CHAIN GUIDE INSTALLATION
Install the cam chain and cam chain tensioner in the reverse
order of removal. Pay attention to the following points:
• Install the cam chain tensioner

1.
$ Cam chain tensioner bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the cam chain

2 to the crankshaft sprocket
.
• Insert the cam chain No.1 guide end

A into the recess

B of
the crankcase securely.
• Fit the projection

C of the cam chain guide in the groove

D of
the cylinder.
• Install the cam chain guide retainer

3 and tighten the retainer
mounting bolt to the specified torque.
$ Cam chain guide retainer mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the magneto rotor and magneto cover. (!14-13)
• Install the cylinder head and cylinder head cover.
(!6-27 to -33)
CAUTION
Make sure that cam chain engages properly to the
cam chain drive gear.