LUBRICATION SYSTEM 11-3
ENGINE OIL LEVEL INSPECTION
(!2-11)
ENGINE OIL CHANGE
(!2-12)
ENGINE OIL FILTER CHANGE
(!2-13)
OIL PRESSURE CHECK
(!2-37)
OIL STRAINERS REMOVAL
(!2-14, 10-4)
OIL STRAINERS INSPECTION
(!2-14)
OIL STRAINERS INSTALLATION
(!2-14, 10-15)
OIL SEAL REMOVAL
• Remove the right crankcase cover. (!8-3)
• Remove the snap ring
1.
"
09900-06108: Snap ring pliers
• Remove the oil seal.
OIL SEAL INSPECTION
For oil seal inspection other than the following, refer to page 10-8.
• Inspect the oil seal lip for wear and damage.
• If any defects are found, replace the oil seal with a new one.
To Next Page
Loading...
