Suzuki RM-Z250 - Crankcase Separation; Transmission Removal

10-4 TRANSMISSION AND CRANKSHAFT
CRANKCASE SEPARATION
• Remove the engine sprocket spacer

1 and two O-rings

2.
• Remove the oil strainer cap

3 and oil strainer (Feed pump
side). (!2-14)
• Separate the crankcase with the special tool.
" 09920-13120: Crankcase separating tool
NOTE:
* Set the crankcase separating tool to the clutch side of the
crankcase.
* Separate the crankcase gradually while hitting the crankcase
boss and countershaft softly with a plastic hammer.
TRANSMISSION REMOVAL
• Remove the dowel pins

1 and gasket

2.
• Remove the oil strainer (Scavenge pump side)

3.