Suzuki RM-Z250 - Inspection

REAR SUSPENSION 18-5
• Adjust the spring set length and tighten the lock-nut.
# Standard spring set length:
5.6 mm (0.22 in) compressed from the free length
Spring set length adjustable range:
247 – 263 mm (9.72 – 10.35 in)
[at spring free length 265 mm (10.43 in)]

a: Hardest spring setting

b: Softest spring setting
$ Spring adjuster lock-nut: 45 N·m (4.5 kgf-m, 32.5 lb-ft)
INSPECTION
• Inspect the rear shock absorber for oil leakage.
• Inspect the damper rod for bends and smooth movement.
• Inspect the bump rubber for deterioration and damage.
• Inspect the damper rod hidden by the bump rubber by moving
the bump rubber.
• Replace the defective parts with a new one if necessary.
• Inspect the spacers and dust seals for damage.
• Inspect the bearing for excessive play and smooth movement.
• Replace the defective parts with a new one if necessary.