Suzuki RM-Z250 - Drive Chain Lubrication; Sprocket Inspection

PERIODIC MAINTENANCE 2-29
DRIVE CHAIN LUBRICATION
• Remove the chain clip and master link from the drive chain
and remove the drive chain.
NOTE:
Be careful not to bend the chain clip.
• Inspect for wear and damage of the drive chain and replace it
if necessary.
• Clean the drive chain with non-flammable cleaning solvent.
• Dry the drive chain.
• Apply Suzuki Chain Lube or equivalent to the link plates and
rollers.
• Reassemble the drive chain.
NOTE:
Reassemble the drive chain clip so the slit end faces opposite
the direction of rotation.
• Adjust the drive chain slack. (!2-28)
SPROCKET INSPECTION
Inspect the engine sprocket and rear sprocket for wear and
cracks. Replace the sprockets as necessary.
NOTE:
When replacing a worn sprocket, it is likely that the drive chain
will need to be replaced as well.
CAUTION
Do not use gasoline to clean the drive chain.
Direction of travel
Normal wear Excessive wear