6-6 CYLINDER HEAD, CYLINDER AND PISTON
• Remove the cylinder gasket
2 and dowel pins.
PISTON AND PISTON RING REMOVAL
• Remove the cylinder. (!6-5)
• Place a clean rag over the cylinder base to prevent the piston
pin circlip
1 from dropping into the crankcase.
• Remove the piston pin circlip
1.
• Remove the piston pin
2 and piston
3.
• Carefully spread the ring opening with your thumbs and then
push up the opposite side of the ring
4 to remove it.
• Remove the oil ring in the same procedure.
To Next Page
Loading...
