Suzuki RM-Z250 - Throttle Body Removal

FRONT AND REAR BRAKES 16-17
BRAKE LEVER
REMOVAL
• Remove the boot

1 and brake lever

2.
• Remove the brake lever adjuster return spring

3.
' 09930-11950: Torx wrench (T25)
INSTALLATION
Install the brake lever in the reverse order of removal. Pay atten-
tion to the following points:
• Apply grease to the brake lever adjuster return spring, pivot
bolt and contact point between piston and brake lever.
( 99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
• Tighten the brake lever pivot bolt and lock-nut to the specified
torque.
# Brake lever pivot bolt

1: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
Brake lever pivot bolt lock-nut

2:
6 N·m (0.6 kgf-m, 4.5 lb-ft)