Suzuki RM-Z250 - Primary Driven Gear and Clutch Sleeve Hub

CLUTCH 7-7
PRIMARY DRIVEN GEAR AND CLUTCH
SLEEVE HUB
REMOVAL
• Remove the clutch cover. (!7-3)
• Remove the pressure plate and clutch plates. (!7-3, -4)
• Flatten the lock washer

1.
• Hold the clutch sleeve hub

2 with the special tool and loosen
the nut

3.
" 09920-53740: Clutch sleeve hub holder
• Remove the nut

3, lock washer

1 and clutch sleeve hub

2.
• Remove the washer

4 and primary driven gear

5.
• Remove the needle bearing

6 and spacer

7.