10-6 TRANSMISSION AND CRANKSHAFT
TRANSMISSION INSPECTION
• Inspect the gear teeth, dogs, and gearshift grooves for abnor-
mal wear and damage.
• Inspect the bushings and splines for abnormal wear and dis-
coloration.
• If necessary, replace defective parts with a new one.
• Inspect the gearshift cam groove for abnormal wear and dam-
age.
• If any defects are found, replace the gearshift cam with a new
one.
• Inspect the gearshift forks and shafts for wear and damage.
• If any defects are found, replace the gearshift fork or shaft.
To Next Page
Loading...
