17-20 FRONT FORK AND STEERING
• Remove the handlebar holders, damper bushings and spac-
ers.
• Remove the steering stem nut with the special tools.
NOTE:
Hold the steering stem lower bracket to prevent it from falling.
" 09940-14911: Steering nut socket wrench
09940-14960: Steering nut wrench socket
• Remove the steering stem lower bracket and lower bearing.
• Remove the upper bearing.
INSPECTION
• Inspect the removed parts for the following abnormalities.
• Distortion of the steering stem
• Bearing wear or damage
• Abnormal bearing noise
• Race wear or damage
• Damper bushing wear or damage
• If any abnormal points are found, replace defective parts with
new ones.
To Next Page
Loading...
