Suzuki RM-Z250 - Bearing Removal and Installation

10-10 TRANSMISSION AND CRANKSHAFT
BEARING REMOVAL AND INSTALLATION
• Remove the oil seals. (!10-9)
• Remove the bearing retainers.
REMOVAL
• Remove the bearings (

1,

3,

5,

6,

7) with the special tool.
" 09913-70210: Bearing installer set
Bearing

1,

7: $ 35 Attachment
Bearing

3,

5,

6: $ 40 Attachment
• Remove the bearings (

2,

8) with the special tool.
" 09921-20240: Bearing remover set
Bearing

2,

8: Remover 17 mm
CAUTION
The removed bearing should be discard.