15-6 FRONT AND REAR WHEELS
INSTALLATION
• Hold the front axle shaft with the special tool and tighten the
front axle nut temporarily.
" 09940-34581: Attachment (F)
• Remove the block from under the chassis tube and move the
front forks up and down several times.
• Tighten the front axle nut to the specified torque.
& Front axle nut: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Tighten the left and right axle holder bolts to the specified
torque.
& Axle holder bolt: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
To Next Page
Loading...
