Suzuki RM-Z250 - Engine Coolant; Replacement

COOLING SYSTEM 13-3
ENGINE COOLANT
REPLACEMENT
• Open the radiator cap.
• Remove the drain bolt

1 and drain engine coolant.
• Tighten the drain bolt

1.
! Engine coolant drain bolt: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
• Pour specified engine coolant up to the bottom of filler hole.
("2-15)
# Engine coolant capacity: 950 ml (1.0/0.8 US/Imp qt)
• Bleed air from the air bleeder bolt

2.
• Tighten the air bleeder bolt

2.
• Add engine coolant up to the radiator inlet.
• Tighten the radiator cap securely.
• After warming up and cooling down the engine, add engine
coolant.
$ WARNING
Engine coolant may be harmful if swallowed or if it
comes in contact with the skin or eyes. If engine cool-
ant gets into the eyes or contacts the skin, flush the
eyes or wash the skin thoroughly, with plenty of water.
If engine coolant is swallowed, induce vomiting and
call a physician immediately.
Do not open the radiator cap when the engine is hot,
as you may be injured by escaping hot liquid or vapor.
CAUTION
Use a new gasket washer to prevent engine coolant
leakage.