CYLINDER HEAD, CYLINDER AND PISTON 6-11
CAM CHAIN No.1 GUIDE, CAM CHAIN No.2
GUIDE AND CAM CHAIN TENSIONER
INSPECTION
• Inspect the contacting surface of the cam chain guides and
cam chain tensioner.
• If it is worn or damaged, replace it with a new one.
CYLINDER HEAD AND VALVE INSPECTION
VALVE DISASSEMBLY
• Remove the tappet
1 and shim
2 by fingers or magnetic
hand.
(Intake side)
• Using the special tools, compress the valve spring and
remove the two cotter halves
3 from the valve stem.
# 09916-14510: Valve lifter
09916-14521: Attachment
09916-84511: Tweezers
CAUTION
Identify the position of each removed part.
CAUTION
Be careful not to damage the tappet sliding surface
with the special tool.
To Next Page
Loading...
