CLUTCH 7-9
• Tighten the clutch sleeve hub nut with the special tool to the
specified torque.
" 09920-53740: Clutch sleeve hub holder
$ Clutch sleeve hub nut: 90 N·m (9.0 kgf-m, 65.0 lb-ft)
• Make sure the clutch sleeve hub for smooth movement.
• Bend the lock washer to secure the nut.
• Reassemble the clutch plates and pressure plate. (!7-6)
• Install the gasket and clutch cover.
• Tighten the clutch cover bolts diagonally.
$ Clutch cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Install the brake pedal. (!16-18)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (!2-11)
• Clutch cable play (!2-17)
• Smooth operation of clutch assembly
CAUTION
Replace the gasket with a new one.
To Next Page
Loading...
