FRONT AND REAR WHEELS 15-9
• Remove the bearings with the special tool.
" 09921-20240: Bearing remover set (Remover 25 mm)
• Remove the spacer.
• Install the bearings with the special tool, using the suitable
spacer
A match for the outside dimension of bearings.
" 09941-34513: Steering race installer
NOTE:
* Install the left side (sprocket side) bearing first and then the
right side bearing.
* After installing the bearings, inspect the bearings for smooth
movement.
• Install the snap ring.
" 09900-06108: Snap ring pliers
CAUTION
The removed bearings must be replaced with new
ones.
Left
Clearance
Right
Spacer
To Next Page
Loading...
