REAR SUSPENSION 18-23
• Tighten the lower drive chain control roller nut to the specified
torque.
$ Chain roller nut: 22 N·m (2.2 kgf-m, 16.0 lb-ft)
CAUTION
Improperly reassembled rear suspension linkage bolts can interfere with suspension move-
ment and damage the rear suspension linkage.
* Make sure that the rear shock absorber rebound damping adjuster on the bottom bracket of
the rear shock absorber is located to the right side.
* Insert the rear suspension linkage bolt
1 from the left side. Make sure that the nut
B is in the
recess of the rear shock absorber bottom bracket.
Left Right
To Next Page
Loading...
