Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 143
Appendix A Alarms, Events and SNMP Traps
Event Messages
32 TPIUTUNE nonalarm TPIU tuning
voltage outside
10%-90% range
Indicates that the
TPIU tuning voltage
is outside the
10%-90% range
No action
required
TPIU tuning
voltage within
10%-90% range
Indicates that the
TPIU tuning voltage
is within the
10%-90% range
No action
required
33 TATUNE nonalarm Timing Antenna
tuning voltage
outside 10%-90%
range
Indicates that the
Timing Antenna
tuning voltage is
outside the
10%-90% range
No action
required
Timing Antenna
tuning voltage
within 10%-90%
range
Indicates that the
Timing Antenna
tuning voltage is
within the 10%-90%
range
No action
required
34 GPSCRC nonalarm GPS CTS CRC
error occurred
Indicates that the
GPS CTS CRC
error has occurred
No action
required
GPS CTS CRC
error cleared
Indicates that the
GPS CTS CRC
error has been
cleared
No action
required
35 OUTRREC nonalarm Output Port <#>
entered <#>
recovery
Indicates that the
output port (1-12)
has entered
bridging/normal
holdover/extended
holdover/exception
al holdover
recovery
No action
required
Output Port <#>
exited <#>
recovery
Indicates that the
output port (1-12)
has exited
bridging/normal
holdover/extended
holdover/exception
al holdover
recovery
No action
required
Table A-3. System Notification Messages - Events (Continued)
Index
Trap Name
(trapID)
Severity
Trap Messages
(trapDescription)
Description
Corrective
Action

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English