Symmetricom TimeCreator 1000 User Manual

144 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix A Alarms, Events and SNMP Traps
Event Messages
36 OUTRTOUT nonalarm Output Port <#>
recovery timeout
Indicates that the
recovery for output
port (1-12) has
timed out
No action
required
37 AUTHGRN nonalarm <#> authorization
granted
The authorization
for the specified
user is granted
No action
required
38 AUTHTERM nonalarm <#> authorization
terminated
The authorization
for the specified
user is terminated
No action
required
39 AUTHDENY nonalarm <#> authorization
denied
The authorization
for the specified
user is denied
No action
required
40 SETBYGPS nonalarm System TOD has
been set by GPS
The TOD has been
set by GPS
No action
required
41 SETBYNTP nonalarm System TOD has
been set by NTP
The TOD has been
set by the NTP
server
No action
required
42 SETTOD nonalarm DTI TOD has been
set
The TOD has been
set by DTI
No action
required
43 IOCREMOVED nonalarm IOC <#> has been
removed
Indicates that the
IOC module has
been removed
No action
required
IOC <#> has been
inserted
Indicates that the
IOC module has
been inserted
No action
required
44 PWRREMOVED nonalarm Power Module <#>
has been removed
Indicates that the
power module has
been removed
No action
required
Power Module <#>
has been inserted
Indicates that the
power module has
been inserted
No action
required
45 UTCAVA nonalarm UTC time from
GPS is available
Indicates that the
UTC time for GPS
is available
No action
required
Table A-3. System Notification Messages - Events (Continued)
Index
Trap Name
(trapID)
Severity
Trap Messages
(trapDescription)
Description
Corrective
Action

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English