Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 145
Appendix A Alarms, Events and SNMP Traps
Event Messages
46 MTIETALA nonalarm Port <#> MTIE-t
threshold set to 0,
alarm disabled
Indicates that the
MTIE-t threshold for
the port has been
set to 0 and the
alarm is disabled
No action
required
Port <#> MTIE-t
threshold set
above 0, alarm
enabled
Indicates that the
MTIE-t threshold for
the port has been
set to nonzero and
the alarm is
enabled
No action
required
47 MTIE35ALA nonalarm Port <#> MTIE-35
threshold set to 0,
alarm disabled
Indicates that the
MTIE-35 threshold
for the port has
been set to 0 and
the alarm is
disabled
No action
required
Port <#> MTIE-35
threshold set
above 0, alarm
enabled
Indicates that the
MTIE-35 threshold
for the port has
been set to nonzero
and the alarm is
enabled
No action
required
48 PPJALA nonalarm Port <#> P-P Jitter
threshold set to 0,
alarm disabled
Indicates that the
P-P Jitter threshold
for the port has
been set to 0 and
the alarm is
disabled
No action
required
Port <#> P-P Jitter
threshold set
above 0, alarm
enabled
Indicates that the
P-P Jitter threshold
for the port has
been set to nonzero
and the alarm is
enabled
No action
required
Table A-3. System Notification Messages - Events (Continued)
Index
Trap Name
(trapID)
Severity
Trap Messages
(trapDescription)
Description
Corrective
Action

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English