Symmetricom TimeCreator 1000 User Manual

146 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix A Alarms, Events and SNMP Traps
Event Messages
49 FERALA nonalarm Port <#> FER
threshold set to 0,
alarm disabled
Indicates that the
FER threshold for
the port has been
set to 0 and the
alarm is disabled
No action
required
Port <#> FER
threshold set
above 0, alarm
enabled
Indicates that the
FER threshold for
the port has been
set to nonzero and
the alarm is
enabled
No action
required
50 PHALOSS nonalarm PM phase data
lost
Indicates that the
performance
monitor's phase
data has lost
No action
required
PM phase data
recovered
Indicates that the
performance
monitor's phase
data has been
restored
No action
required
51 JITLOSS nonalarm PM jitter data lost Indicates that the
performance
monitor's jitter data
has lost
No action
required
PM jitter data
recovered
Indicates that the
performance
monitor's jitter data
has been restored
No action
required
52 SETBYDTI nonalarm System TOD has
been set by root
server
The TOD has been
set by the root
server
No action
required
53 SETBYUSER nonalarm System TOD has
been set by user
The TOD has been
set by the user
No action
required
54 RSREN nonalarm Entered auto root
recovery
Indicates that the
system has entered
auto root recovery
No action
required
Table A-3. System Notification Messages - Events (Continued)
Index
Trap Name
(trapID)
Severity
Trap Messages
(trapDescription)
Description
Corrective
Action

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English