Symmetricom TimeCreator 1000 User Manual

182 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Alarm-Threshold
This command displays the set and clear alarm thresholds for MTIE-35, Jitter,
MTIE-35, MTIE-t, and FER.
Command Syntax:
show alarm-threshold
Example:
tc1000>show alarm-threshold
Response:
port - 1
FER set - 100
FER clear - 10
MTIE-t set - 10000
MTIE-t clear - 7000
Jitter set - 8000
Jitter clear - 5000
MTIE-35 set - 10000
MTIE-35 clear - 7000
port - 2
FER set - 100
FER clear - 10
MTIE-t set - 10000
MTIE-t clear - 7000
Jitter set - 8000
Jitter clear - 5000
MTIE-35 set - 10000
MTIE-35 clear - 7000
port - 3
FER set - 100
FER clear - 10
MTIE-t set - 10000
MTIE-t clear - 7000
Jitter set - 8000
Jitter clear - 5000
MTIE-35 set - 10000
MTIE-35 clear - 7000
.................
Remarks: When ports A/11 and B/12 are configured as clients, alarm thresholds
are not used.
Related:
set alarm-threshold

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English