Symmetricom TimeCreator 1000 User Manual

196 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
To backup the current IOC configuration in the IMC card -
tc1000>set configuration backup IOC
Example 3:
To backup the current IMC configuration in IOC1 card -
tc1000>set configuration backup IMC IOC1
Example 4:
To restore the configuration from the same card -
tc1000>set configuration restore
Example 5:
To restore the IOC configuration from the IMC card -
tc1000>set configuration restore IOC
Example 6:
To restore the IMC configuration from IOC2 -
tc1000>set configuration restore IMC IOC2
Example 7:
To restore the configuration to the default values, but preserving user and ip
configuration
-
tc1000>set configuration default
Example 8:
To restore the configuration to the factory values -
tc1000>set configuration factory
Remarks: Setting the configuration to default will not overwrite user login
information or system’s IP address. Setting the configuration to factory resets all
settings to the factory default. The IOC configuration is automatically saved in the
IOC one minute after a configuration setting is changed.
Related: See Set commands
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English