Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 197
Appendix B Command Descriptions and Communications Interface
CLI Commands
Set Configuration Restoreuser IMC
This command is used to restore the IMC configuration from the remote server. This
is a two-step process that also requires using the
set recvconfig IMC
user@host:file
command.
Command Syntax:
set configuration restoreuser IMC
Example 1a:
To retrieve the IMC configuration file “/home/user/imc.bak” from the remote server
at IP address 192.168.3.86 -
set sendconfig IMC user@192.168.3.86:/home/user/imc.bak
Example 1b:
To restore the IMC configuration file that was retrieved rom the remote server -
set configuration restoreuser IMC
Remarks:
Level : Power-User and Admin only
Set Configuration Restoreuser IOC
This command is used to restore the IOC configuration from the remote server. This
is a two-step process that also requires using the
set recvconfig IOC
user@host:file
command.
Command Syntax:
set configuration restoreuser IOC
Example 1a:
To retrieve the IOC configuration file “/home/user/imc.bak” from the remote server at
IP address 192.168.3.86 -
set sendconfig IOC user@192.168.3.86:/home/user/imc.bak
Example 1b:
To restore the IOC configuration file that was retrieved rom the remote server -

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English